this came with a load of bits from Germany , the other parts look like they were dug from a dumping ground for german boxes/crates etc
from the photo I thought it was vehicle handle but its much too heavy for that ..any ideas from the vehicle buffs ?
there was something fitted through the narrow part for sure.
any ideas ?
Unidentified part .... vehicle or ?
Re: Unidentified part .... vehicle or ?
looks like a door handle for a car
95th nacht..attached 85th gebirgsjeager
have enigma ,will travel.
have enigma ,will travel.
Re: Unidentified part .... vehicle or ?
To me it looks like one of two things a) part of a spring shackle from a truck or b) part of a pittman arm / drag link assembly.
Bob
Bob
Re: Unidentified part .... vehicle or ?
Much to heavy for a door handle les its 700g
strong enough for a pittman arm but would they not have either two (at least) 15mm holes or one hole and a ball pin joint ?
I`ll get it cleaned up a bit to give a better idea of it
strong enough for a pittman arm but would they not have either two (at least) 15mm holes or one hole and a ball pin joint ?
I`ll get it cleaned up a bit to give a better idea of it
- Sturmschar
- Posts: 363
- Joined: Wed Nov 25, 2009 10:18 am
- Location: Reigate Mozambique
Re: Unidentified part .... vehicle or ?
It looks very much like the pin of a tow hitch something like this on my Ford V3000
Always keep the boot of destiny aimed at the arse of anticipation!