Another stupid question no doubt, but can anyone give me any tips on how to age and possibly shrink a new crusher cap, as oppossed to playing fetch with Elsa my long haired german shepherd ?
Again cheers kameraden
Ageing a crusher
-
- Posts: 27
- Joined: Sun Oct 25, 2009 9:28 pm
-
- Posts: 5732
- Joined: Wed Aug 09, 2006 4:41 pm
- Location: TAMPERE FINLAND
- Contact:
Re: Ageing a crusher
Best thing is use , You can wear it in the shower and shape it it will also give it water marks
Re: Ageing a crusher
This has been covered
http://panzergrenadier.net/forum/viewto ... +hot+water
It's always a good idea to do a quick search of forums on such topics.... No doubt you will find more than this thread if you do.
http://panzergrenadier.net/forum/viewto ... +hot+water
It's always a good idea to do a quick search of forums on such topics.... No doubt you will find more than this thread if you do.
Re: Ageing a crusher
The first thing i did was removing all iron in the hat.
Then make the wool wet,place it on your skull,pull the wool behind
till it got the right shape.Then let it dry with a hair-blower while the hat is still
on your head.
Then make the wool wet,place it on your skull,pull the wool behind
till it got the right shape.Then let it dry with a hair-blower while the hat is still
on your head.
- Kradschuetze
- Posts: 311
- Joined: Sat Nov 07, 2009 12:29 am
- Location: Im Land der begrenzten Möglichkeiten
Re: Ageing a crusher
When the cap is still wet burn with a blowtorch or burner carefully and this from resulting in the dirt would rub. again and again pull the cover back. Take care, which is also fired from the top.
Then the cap ring with hot water-wet and dry wear ... there, the ring enters ring on drying and the cap does not fit properly. Especially good is touching the car and tighten screws with the dirty hands often.
Here is an example.
Before: After:
Then the cap ring with hot water-wet and dry wear ... there, the ring enters ring on drying and the cap does not fit properly. Especially good is touching the car and tighten screws with the dirty hands often.
Here is an example.
Before: After:
-
- Posts: 2753
- Joined: Tue Jan 10, 2006 8:20 pm
- Location: Afra
Re: Ageing a crusher
burn it ......
- Kradschuetze
- Posts: 311
- Joined: Sat Nov 07, 2009 12:29 am
- Location: Im Land der begrenzten Möglichkeiten
Re: Ageing a crusher
Burn at least as I think the best option, you get the hat also like a bit dry.
What I need is still a reasonable Schirmmütze FG Heer... the best Erel Repro.
The other cap in the first image has a stripe on the inner ring (hard cardboard) and the leather shield is too strong ... this could easily pass for a Schirmmütz, because if there really existed in this form.
What I need is still a reasonable Schirmmütze FG Heer... the best Erel Repro.
The other cap in the first image has a stripe on the inner ring (hard cardboard) and the leather shield is too strong ... this could easily pass for a Schirmmütz, because if there really existed in this form.