Shooting lanyard badge

Swap information and ask any questions about an impression.
Post Reply
User avatar
pzrwest
Posts: 1690
Joined: Wed Mar 08, 2006 11:59 pm
Location: Cardiff, Ontario, Canada
Contact:

Shooting lanyard badge

Post by pzrwest »

I hope this is the right section for this.
I need the dimensions of the shield that goes on the shooting lanyard for grades 1-4 it's the plain shield with the eagle in the middle. I need the length and the width of the shield. Will thank in advance for any help on this
User avatar
pzrwest
Posts: 1690
Joined: Wed Mar 08, 2006 11:59 pm
Location: Cardiff, Ontario, Canada
Contact:

shield

Post by pzrwest »

Well an update on the shield I have aquired an old shooting lanyard with a good shield on it the lanyard part is junk it's in sad shape. I have molded the shield and will be doing a test casting of it in resin with attaching prongs then spraying it with matt silver/aluminum paint and see how it looks. Several people have asked if I could make some to convert the EG shooting lanyards to ww2 ones. Will post the results
Post Reply

Return to “Questions, Tips and Tricks”